Home

Universal Long Reach Spark Plug Boot Puller

List Price: $49.95

Product Description

Universal Long Reach Spark Plug Boot Puller Long reach to grab down to the bottom of the spark plug boot. Tips have a gripping ledge to go under the spark plug boot. Tips have a vertical ribs to grip the spark plug boot to help break it loose. Swivel design for any angle of approach which allows the use of a lever block to pop the spark plug boot off. This tool works on all types of vehicles.

---

Customer Reviews

Absolutely worthless item
I bought this item to change the spark plugs on a 2001 750iL where the spark plugs are deep in the engine and hard to reach anyway. The sockets are somewhat delicate to get off. Pulling the wiring might result in a broken socket what is about $250. There is not space for a hand either.

This tool doesn't work at all, cause it is too big to reach in to the tiny opening. The other problem is that the wiring has to be really long and thin to work with this too cause the outlet on the tool is all the way up. It will not work if you have a protective lining around the wiring. A third isssue is that the tool slips of the socket even if you apply a lot of force to the grips.

All in all this tool is a bis waste of money. For places you can reach by hand, you dont need it anywhere else it doesnt work. Don't waste your money on it.

2010-08-02 (Florida, USA) | Helpful Votes: 0 | Rating: 1

---

Universal Long Reach Spark Plug Boot Puller by Schley
My advise is to pass on this tool.

The jaws of the tool come down straight from the pivot point. This prevents the tool from clamping squarely on the bottom of a spark plug boot. You a only squeezing the boot at the very top. It may have worked well for the thin boots found on the 1960s and earlier cars, but nothing that I own today.

The Lisle 51250 spark plug boot puller is cheaper and actually works.

2009-04-16 (Minnesota) | Helpful Votes: 4 | Rating: 1

---

Westward 2GKR9 Spark Plug Boot Puller, 5 3/4 In L

Product Description

Spark Plug Boot Puller, Length 5 3/4 In, Works with All Gasoline Engines, For Use With Spark Plugs, Material Carbon Steel

---

Customer Reviews

Worked exactly as advertised!
After spending nearly 5 hours trying to remove the boot and plug to change my spark plugs, the last one of 6 would not budge! I figured there HAD to be a better way. Well, there is, this cheap little tool lets you get leverage to get to the most awkward place on the back and within the first 2 minutes (with a lot of elbow grease), the boot was off. I was amazed! Whoever invented this tool knew exactly what was necessary to get the job done.

2010-05-01 | Regal Owner (Nashville, TN) | Helpful Votes: 0 | Rating: 5

---

KD Tools Spark Plug Boot Puller

List Price: $4.92

Product Description

Features: Use this nonconductive tool to safely remove spark plug boots with the engine running. A flexible shaft makes it easy to reach the spark plug boot. Tool helps you avoid engine burns.

---

Thexton 334 Spark Plug Wire Puller

List Price: $24.99 Price: $15.76 You Save: $9.23 (37%)

Product Details Front tabs grip under front of boot while jaws secure the sides Removes frozen spark plug boots with a twist and a pull All-steel construction with vinyl grips

Product Description

These spark plug wire pullers are made durable, all steel construction with vinyl grips for a better hold. When removing spark plug boots, they allow for a safe and secure grip, which eliminates any separating or damaging boots and wires.

---

Customer Reviews

Nice Quality, Works as promised, Made in USA
Nicely designed product. I could not find my old plug wire puller, and was looking at some at the local auto parts store, however all garbage made in China construction and design.
I am glad I waited and bought these off Amazon. I was concerned about the "teeth" on this tool, but they perfectly mount the plug wire boot, firmly and no cheap sharp metal.
These are smaller than I expected, they are 3 1/2" deep and the top handle full spread is 3", contact section about 1 1/4" spread. This ended up being perfect for my application which was to replace a spark plug on my rototiller. I definitely did not want to do that by "hand" which was too tight for my fingers to grasp firmly, and if I tore up that boot, I would be looking at mail ordering a specialty part and turning a quick plug replacement to a take apart repair.
They should provide a simple diagram to show how to grasp the plug wire, but you will quickly figure it out. The lower "teeth" go under the wire attached to the boot.
If you need a puller to go into a deep narrow place, this is not the product, but for the 90% of other application this is perfect. And for any tight old spark plug wires where no silicon grease was ever used, these make a fantastic grip, better than fingers.
Many people just hand pull plug wires, but that goes so long until you break apart a wire boot, it is basically like yanking an appliance cord out by the wire, not by the plug. Then a simple tune up means a trip to the local auto parts store for a repair job, or buying a costly unique wire for your lawn equipment. I learned that lesson when I was 17 working on my camaro, ALWAYS us a plug wire puller.
In summary, great product, Made in USA, impress your friends and customers by doing the job like a pro. A good analogy, these are your trusty pliers you use 90% of the time, not needle nose long reach ones you use less often. Basically your fingers have to get withing 3" of the plug boot, then a couple twists, and a clean pull with this product.

2010-05-13 (Annandale, VA) | Helpful Votes: 0 | Rating: 5

---

get it
very useful to get into tight spots where your hands just dont fit. this is a compact tool that does its job well

2009-11-14 | Helpful Votes: 0 | Rating: 5

---

Schley (SCH98180A) VW / Audi Spark Plug Boot Puller / Installer

List Price: $66.96

Product Description

Features and Benefits:

• New design also works on 2006 and later VW and Audi 
• Made from hardened stainless steel 
• Includes "T" handle giving the technician plenty of pulling power to remove and replace the most difficult spark plug boot 
• Helps to remove and install the spark plug boot that is in a very confined area

Replaces the SCH98180. This tool works on 1.8L 4 cylinder turbo VW and Audi 1998-2006; 2.0L 4 cylinder VW 1993-2005; 2.0L cylinder turbo VW and Audi 2006 and later.

---